The ironing machine is generally a single, two roller (modern ironing machine may contain three roll), and by hand or by power to rotate. The roller by steam or electric heating, reaches a certain temperature, when the wet clothes after between two rollers are rolled after, can remove a lot of water, and achieve the effect of ironing, ironing machine for flat rolling process sheets, table cloth, cloth and so on, because of the ironing machine in daily use will inevitably be part of need to replace the damaged parts, the following are some common ironing machine parts need to be replaced. Ironing machine accessories include: rotary ironing machine interface, steel hose, tension rod, shaft sleeve, safety valve, pressure wheel, idler pulley, drying cylinder etc..

The characteristics of steam ironing machine.

1, using variable frequency speed control to facilitate the user to choose the appropriate ironing speed according to the needs of different fabrics and fabric thickness.

2, the transmission equipment, steam inlet and drainage system (steam heating type) are respectively arranged on both sides of the cabinet, beautiful and novel appearance, compact structure, small volume.

3. Using the method of pressing the pressure steam through the drum, heating the surface of the drum to make the fabric dry and ironed.

4, the equipment set the corresponding speed difference between the various levels of the conveying system, so that the fabric is easier to be tensioned and ironed.

5. The speed regulation of the motor is controlled by the cycloid gear reducer and the frequency converter. The chain is driven by the chain, the equipment runs smoothly, the overload capacity is strong, the noise is low, each chain has a tensioning device, which is convenient to adjust and tighten.

6, the use of wide split belt transmission and ring separated, to avoid bursting with autokinetic phenomenon cannot be solved in transmission, and using micro buckles, loading and unloading, the replacement is very convenient.

7, ironing machine (steam heating type) steam inlet is provided with a safety valve, the factory has a good tune, normal work, generally do not need to adjust, the user must be sent to the labor department annual check time.

8, the transport level between the ironing machine with the temperature small guide belt isolation, ensure the fabric does not produce bonding phenomenon, the cotton fabric can achieve satisfactory effect of ironing.